OEM Customized Turn-Key Alcohol Project - Threonine continuously crystallization process – Jinta
OEM Customized Turn-Key Alcohol Project - Threonine continuously crystallization process – Jinta Detail:
Threonine introduction
L-threonine is an essential amino acid, and threonine is mainly used in medicine, chemical reagents, food fortifiers, feed additives, etc. In particular, the amount of feed additives is increasing rapidly. It is often added to the feed of juvenile piglets and poultry. It is the second restricted amino acid in pig feed and the third restricted amino acid in poultry feed. Adding L-threonine to compound feed has the following characteristics:
① It can adjust the amino acid balance of feed and promote the growth of poultry and livestock;
② It can improve meat quality;
③ It can improve the nutritional value of feed with low amino acid digestibility;
④ It can reduce The cost of feed ingredients; therefore, it has been widely used in the feed industry in EU countries (mainly Germany, Belgium, Denmark, etc.) and American countries.
The production and detection method of L-threonine
The production methods of threonine mainly include fermentation method, protein hydrolysis method and chemical synthesis method. Microbial fermentation method produces threonine, which has become the current mainstream method due to its simple process and low cost. There are many methods for determining threonine content in the middle of fermentation, mainly including amino acid analyzer method, ninhydrin method, paper chromatography method, formaldehyde titration method, etc.
Paten No.ZL 2012 2 0135462.0
Summary
Threonine filter clogging liquid will generate crystal in the condition of low concentration evaporation, In order to avoid crystal precipitation, the process will adopt the mode of four-effect evaporation to realized clear and closed production. Crystallization is the Self-developed Oslo elutriation crystallizer without stirring
The device adopt automatic program to control.
Third, the process flow chart:
Product detail pictures:
Related Product Guide:
We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for OEM Customized Turn-Key Alcohol Project - Threonine continuously crystallization process – Jinta , The product will supply to all over the world, such as: Zurich, Birmingham, Casablanca, We are adhering to the philosophy of "attracting customers with the best products and excellent service". We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
By Linda from Swiss - 2018.05.13 17:00
Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
By Agatha from Ghana - 2018.05.22 12:13
Related products
-
OEM Supply Sanitary Shell And Tube Heat Exchang...
National invention patent The characteristics and treatment method of furfural wastewater: It has strong acidity. The bottom wastewater contains 1.2%~2.5% acetic acid, which is turbid, khaki, light transmittance <60%. In addition to water and acetic acid, it also contains extremely A small amount of furfural, other trace organic acids, ketones, etc. The COD in the wastewater is about 15000～20000mg/L, BOD is about 5000mg/L, SS is about 250mg/L, and the temperature is about 100℃. If the was...
-
China New Product Alcohol Distilling Equipment ...
Molasses alcohol waste liquid five-effect evaporation device Overview Source, characteristics and harm of molasses alcohol wastewater Molasses alcohol wastewater is high-concentration and high-color organic wastewater discharged from the alcohol workshop of the sugar factory to produce alcohol after the fermentation of molasses. It is rich in protein and other organic matter, and also contains more inorganic salts such as Ca and Mg and higher concentrations. SO2 and so on. Normally, the ...
-
Factory source Edible Alcohol Equipment - Wast...
Overview For the characteristics of “high salt content” of waste liquid produced in cellulose, salt chemical industry and coal chemical industry, the three-effect forced circulation evaporation system is used to concentrate and crystallize, and the supersaturated crystal slurry is sent to the separator to obtain crystal salt. After separation, the mother liquor returns to the system to continue. Circulating concentration. The device is controlled by automatic program. Evaporation ...
-
Factory For Valve Trays In Distillation Column ...
Summary The containing Pentosan plant fiber materials (like Corn cob, peanut shells, cotton seed hulls, rice hulls, sawdust, cotton wood) will hydrolysis into pentose in the fluence of the certain temperature and catalyst, Pentoses leave off three water molecules to form furfural The corn cob is used by the materials usually, and after a series of process that include Purification, crushing, with acid hydrolysis, mash distillation, neutralization, dewatering, refining get the qualified f...
-
Lowest Price for Mechanical Vapor Recompression...
Hydrogen peroxide production process The chemical formula of hydrogen peroxide is H2O2, commonly known as hydrogen peroxide. Appearance is a colorless transparent liquid, it is a strong oxidant, its aqueous solution is suitable for medical wound disinfection and environmental disinfection and food disinfection. Under normal circumstances, it will decompose into water and oxygen, but the decomposition rate is extremely slow, and the speed of the reaction is accelerated by adding a catalyst ...
-
Wholesale Asme Shell And Tube Type Heat Exchang...
National invention patent The characteristics and treatment method of furfural wastewater: It has strong acidity. The bottom wastewater contains 1.2%~2.5% acetic acid, which is turbid, khaki, light transmittance <60%. In addition to water and acetic acid, it also contains extremely A small amount of furfural, other trace organic acids, ketones, etc. The COD in the wastewater is about 15000～20000mg/L, BOD is about 5000mg/L, SS is about 250mg/L, and the temperature is about 100℃. If the was...