2021 New Style Mechanical Vapour Recompression Evaporator - Dealing with the new process of furfural waste water closed evaporation circulation – Jinta
2021 New Style Mechanical Vapour Recompression Evaporator - Dealing with the new process of furfural waste water closed evaporation circulation – Jinta Detail:
National invention patent
The characteristics and treatment method of furfural wastewater: It has strong acidity. The bottom wastewater contains 1.2%~2.5% acetic acid, which is turbid, khaki, light transmittance <60%. In addition to water and acetic acid, it also contains extremely A small amount of furfural, other trace organic acids, ketones, etc. The COD in the wastewater is about 15000～20000mg/L, BOD is about 5000mg/L, SS is about 250mg/L, and the temperature is about 100℃. If the waste water is not treated and discharged directly, the water quality will inevitably be seriously polluted and the structure of the ecological environment will be destroyed. The general treatment methods mainly include: chemical method, biological method (upstream aerobic reaction, filtered aerobic reaction, etc.), aerobic treatment process (SBR reaction, contact oxidation reaction), among which aerobic treatment is another after anaerobic treatment A treatment process, in order to ensure the standard of effluent water quality, is an indispensable treatment process in the treatment of furfural wastewater. However, in the project commissioning stage, aerobic commissioning will waste a lot of time and money, which will increase the cost of water treatment projects, such as commissioning. If it is not good, it will make the overall process unable to run, so aerobic debugging is very important to the overall project, but nutrients are essential in aerobic debugging.
Waste water produced by furfural is belong to Complex organic wastewater, which contain cetic acid, furfural and alcohols, aldehydes, ketones, esters, organic acids and many kinds of organics, PH is 2-3, high concentration in COD,and bad in biodegradability.
The process regard saturated steam as heat source, evaporation system make.
Waste water vaporized, boost pressure to reach production requirement, recycle the furfural and heat from the waste water to realize waste water recycle in production process. The device adopt automatic program to control.
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 2021 New Style Mechanical Vapour Recompression Evaporator - Dealing with the new process of furfural waste water closed evaporation circulation – Jinta , The product will supply to all over the world, such as: Morocco, Tunisia, Adelaide, We have top engineers in these industries and an efficient team in the research. What is more, now we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Remember to find our website to check more information from our merchandise.
By Beryl from Morocco - 2018.06.28 19:27
High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
By Mavis from Ecuador - 2018.10.01 14:14
Related products
-
18 Years Factory Bioethanol Plant - Hydrogen p...
Hydrogen peroxide production process The chemical formula of hydrogen peroxide is H2O2, commonly known as hydrogen peroxide. Appearance is a colorless transparent liquid, it is a strong oxidant, its aqueous solution is suitable for medical wound disinfection and environmental disinfection and food disinfection. Under normal circumstances, it will decompose into water and oxygen, but the decomposition rate is extremely slow, and the speed of the reaction is accelerated by adding a catalyst ...
-
factory Outlets for Alcohol Brewing Machine - ...
Threonine introduction L-threonine is an essential amino acid, and threonine is mainly used in medicine, chemical reagents, food fortifiers, feed additives, etc. In particular, the amount of feed additives is increasing rapidly. It is often added to the feed of juvenile piglets and poultry. It is the second restricted amino acid in pig feed and the third restricted amino acid in poultry feed. Adding L-threonine to compound feed has the following characteristics: ① It can adjust the amin...
-
OEM Supply Heat Exchanger Systems - Dealing wi...
National invention patent The characteristics and treatment method of furfural wastewater: It has strong acidity. The bottom wastewater contains 1.2%~2.5% acetic acid, which is turbid, khaki, light transmittance <60%. In addition to water and acetic acid, it also contains extremely A small amount of furfural, other trace organic acids, ketones, etc. The COD in the wastewater is about 15000～20000mg/L, BOD is about 5000mg/L, SS is about 250mg/L, and the temperature is about 100℃. If the was...
-
Cheap price Asme Stainless Steel Pressure Vesse...
Hydrogen peroxide production process The chemical formula of hydrogen peroxide is H2O2, commonly known as hydrogen peroxide. Appearance is a colorless transparent liquid, it is a strong oxidant, its aqueous solution is suitable for medical wound disinfection and environmental disinfection and food disinfection. Under normal circumstances, it will decompose into water and oxygen, but the decomposition rate is extremely slow, and the speed of the reaction is accelerated by adding a catalyst ...
-
High reputation Asme High Pressure Vessel Manuf...
Hydrogen peroxide production process The chemical formula of hydrogen peroxide is H2O2, commonly known as hydrogen peroxide. Appearance is a colorless transparent liquid, it is a strong oxidant, its aqueous solution is suitable for medical wound disinfection and environmental disinfection and food disinfection. Under normal circumstances, it will decompose into water and oxygen, but the decomposition rate is extremely slow, and the speed of the reaction is accelerated by adding a catalyst ...
-
Best quality Yeast Tank - Dealing with the new...
National invention patent The characteristics and treatment method of furfural wastewater: It has strong acidity. The bottom wastewater contains 1.2%~2.5% acetic acid, which is turbid, khaki, light transmittance <60%. In addition to water and acetic acid, it also contains extremely A small amount of furfural, other trace organic acids, ketones, etc. The COD in the wastewater is about 15000～20000mg/L, BOD is about 5000mg/L, SS is about 250mg/L, and the temperature is about 100℃. If the was...